Instructions
How to use your chair.
Maximum working load 250 lbs. Maximum design load 450 lbs. This chair sits low to the ground and requires some agility to use — please follow the directions below.
Setup and sitting
- A. Open the U-frame 90° to the main frame. Open the V-brace to the maximum length of the strap.
- B. Stand directly over the chair, squat down (good knees required), and grip the main frame tubes with both hands at the marked points. Sit in the sling directly over the bottom cross tube. Lean back and slide to the most comfortable position.
Grip both side rails to sit.
Notes on care
Keep it quiet, keep it clean.
1. Wax the frame
Paste wax on the aluminum frame helps prevent oxidation and helps the headrest snap on and off easily.
2. Oil the joints
One drop of oil at each U-frame joint quiets any squeak. Rotate the joint to work it in, then wipe off excess.
3. Wash gently
Wash the rip-stop nylon with mild soap and water, rinse well. Do not submerge. Excess sun exposure will eventually damage the nylon over time.