|
MAXIMUM WORKING LOAD 250 LBS.
MAXIMUM DESIGN LOAD 450 LBS.
Caution using this chair, it is low
to the ground
and requires some agility to use.
Please follow directions to use!
A:
To use the chair open U-frame 90 deg. to main frame Open V-brace to maximum length of strap.
B. Stand directly over the chair and as demonstrated in the photo, squat
down (good knees required) and GRIP main frame tubes with "BOTH HANDS" at points labeled. SIT in
the sling DIRECTLY OVER the bottom cross tube. Lean back in the chair and slide to the most
comfortable position.

Grip both side rails to sit !!!
Notes
on Care
-
Paste wax applied to the
aluminum frame will help
prevent oxidation and will help the headrest snap on and off easily.
-
A
drop or two of oil applied to the U-frame joints will
help quiet any squeak that develops. Apply oil to tube and rotate joint to
work in wipe off excess.
-
Wash ripstop nylon with mild soap & water
and rinse well. (Do not submerge).
-
As with all
nylon excessive sun exposure will eventually damage
the ripstop nylon.
|